Hammer Crusher

Home>Products > Crushing Machine > Hammer Crusher >

Impact Hammer Mill

Hammer Mill Crusher can crush the mineral particles into 180 mesh

Please enter your mailbox

Email:

Sand Gravel Trommel Screen
  • Impact Hammer Mill
  • Impact Hammer Mill
  • Impact Hammer Mill
  • Impact Hammer Mill
  • Impact Hammer Mill
Product Overview

Introduction

Impact Hammer Mill can crush ore which is below 50mm or the tailings, middlings which in the uncompleted ore. And break up the useful metal from the ore, depending on the requirement of factory, it can crush the mineral particles in 1 to 180 mesh, and separate them in the shaking table.They are suitable for the small factory, and same times can take place of ball mill in some degree,easy installation, easy operation, less investment, fast effect. The rock hammer crusher consist of rotor which with hammer, and the rotor consist of spindle, disk, pin and hammer. The motor drives the rotor to rotate at a high speed through the belt, the material enter the machine through the feeding port the rotating hammers with high rotation speed are crushing them, the small size mineral was discharge through the sieve and the large size silt was crush and beat in the sieve until the crushed products meeting the required size can be discharged by the outlet and become the final products.

Features

1) Simple structure in linear type ,easy in installation and maintation.

2) 1.High production and high crushing ratio.

3) Low power consumption, homogeneous particle size.

4) Low investment cost, easy management.

Application

This crusher is widely used in the work of mine, building material, road, railway, irrigation, chemical industry, ect. It is
especially used to crush limestone and medium hard materials which compression strength are less than 200Mpa.

Compared with other hammer crushers, this crusher hammer head is with high abrasion performance of hammer, large rotational inertia and high rotor kinetic energy.
Detailed Images
PRODUCT SPECIFICATIONS
Technical Parameters of Hammer Mill Machine
Model
Capacity(t/h)
Feeding size(mm)
Discharge size(mm)
200*500
0.1-0.8
≤30
≤1
300*500
0.8-1.5
≤30
≤1
400*600
1-2.5
≤45
≤1
500*700
1-3
≤45
≤1
500*800
1.5-4
≤45
≤1
Working Principle
Working Principle of Impact Hammer Mill
The motor drives the rotor to rotate at a high speed through the belt, and on the rotor there are series of hammers. When the materials get into the working area of hammers, the rotating hammers with high rotation speed are crushing them, the crushed products meeting the required size can be discharged by the outlet and become the final products, the large size products are brought back to the crushing area by the hammers for being re-crushed until they reached the required size.
Company Profile
Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters
and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team.
With 32% market share in China and the rest to overseas, already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.
Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc..

We are expert especially at mining separating and lab mining plant, main products as below:


Laboratory equipment

Gravity Separation Plant

Flotation Machine

Magnetic Separator

Screen Machine

Sand Washing Machine

Crushing Plant

Feeding Machine

Conveying Machine

Pump

Melting Machine

To View More

FAQ
Our Service:

1) Pre-sale service:
Freely provide project designing, process designing, choosing suitable equipment for you.

2) Medium-sales service:
Accompany you to complete the acceptance of the equipment, draft the construction scheme and detailed process, and complete process of export

3) After-sales service:
Offer considerate technical guidance in installation, debugging and operators training. We are available at any time if you need.


Q1:Are you a manufacturer of mining equipment?
A1:YES, with more than 15 years production & sales experience
Q2: Could your company help design mineral flow chart?
A2: YES,  we have about 20 people team of technician and can design a whole set of processing line.

Q3: Can you provide sample testing?
A3: YES, we have mineral testing laboratory and can do sample testing for you.

Q4: For efficient communication, what information should you provide before quotation?
1) what's your processed material? if it's rock ore, do you have mineral report?
2) what's your capacity(tons per hours)?


Your Name:
*E-mail:
Phone:
Company:
*Content: